NO-OX-ID rust preventatives are excellent barrier coatings that prevent rust and corrosion from attacking steel surfaces of water tank interiors, water filtration plants, sewage plants, water distribution systems and power plants. This anti corrosion product is NSF approved for use as both a anti condensation barrier coating inside water tanks and as a rust prevention lubricant inside of water filtration plants.
NO-OX-ID protective coating require minimal surface preparation and are a long-term solution to corrosion problems. NO-OX-ID A-Special WW is a cosmoline type rust preventative that is used as an anti condensation coating on structural steel, in acid pickling areas, brine tanks, inside water tanks, steel cables, bridges and cofferdams. Use NO-OX-ID cosmoline type rust preventative whenever a heavy duty rust preventive or anti condensation coatings are required.
NO-OX-ID rust preventatives are formulated with a proprietary blend of waxes, metal wetting agents and corrosion rust inhibitors which penetrate into the pores of the metal preventing underfilm corrosion . No taste or odor is imparted to the water supply. For water storage tanks, we recommend coating thickness of 20-30 mils. Contractors who apply NO-OX-ID rust preventative coating usually give a 3-5 year unconditonal performance guarantee. How can they do this? They have over 60 years of first hand experience using NO-OX-ID's and this performance record means their is no risk!
NO-OX-ID barrier coatings provide excellent corrosion control in just one coating application. This means that the coatings applicator sets up scaffolding and apply paint less times so the job should cost less. This also means in small towns where you run your water supply from a safely valve when the tank is being painted your system will be under stress for less time. This corrosion resistant product requires only minimal surface preparation and it can be easily applied under a wide range of conditions. Twenty four hours after application, the tank coating can be flushed with potable water then disinfected in accordance with AWWA D-105. (NOTE: If while you are applying this surface coating to your towns water tower and there is an emergency need for water just fill the tank on solve the emergency. Once applied, water can not wash away the wax coating !)
In 1948 the AWWA first recognized NO-OX-ID type protective coating systems for painting the interiors of municipal drinking steel water storage tanks. Then in 1961 this corrosion resistant coating gained approval of the United States EPA.
Performance Features: Blocks Corrosion, Maintains Flexibility, Lubricate, Antiseize, Self Healing, Non-cracking, Seals surface, Multi-functional, Low moisture absorption, Excellent chemical stability, High resistance to chemical action, Prevents biological attack of structure, prevention of corrosion caused by dissimilar metals.
Surface Preparation - is generally done by hand or power driven brush to remove loose rust scale. But for a severely corroded tank, sandblasting tank interiors SSP#6 may be required. NO-OX-ID and its rust inhibitor system penetrates into the metal surface therefore this steel coating is more resistant to underfilm corrosion.
Application: This corrosion product can be cold applied with a stiff bristle brush, roller with a 3/4" nap, or applied hot using airless spray equipment..
PREVENT RUST IN WATER & WASTEWATER FACILITIES WITH NO-OX-ID
- Ash Conveyors
- Bar Screens
- Bearings - Low Speed
- Bolts
- Brackets
- Baffles
- Cable
- Metal parts of Clarifiers
- Chains
- Clamps
- Packing Glands to Prevent
- Concrete Reservoirs Metal Parts of Flocculators
- Concrete Pipe
- Corrosion of Stems
- Concrete Walls
- Cranes
- Condenser Cooling Coils
- Derricks
- Fittings
|
- Threaded Connections
- Flanges
- Flat Gates
- Mixing & Aeration Equipment
- Flocculater Shafts
- Gears
- Hydrant Pipes Rods & Connectors
- Hoppers
- Hydrant Gasket
- Nuts & Bolts
- Paddles
- Pipes Sludge Digestion & Removal Pulleys
- Pumps
- Equipment Filtering Systems
- Radial Gates
- Screens
|
- Steel Settling Tanks
- Standpipes
- Storage Tanks
- Tank Roofs Underside
- Steel Baffles
- Strainers
- Water Tank Interiors
- Submersible Pumps
- Valves
- Tank Bottoms
- Buried Valves
- Buried Pipes
- NSF approved lubricant
- Batteries & electrical
|
Prevent Lime Build-up - NO-OX-ID is a corrosion coating that has been used in maintenance of the water clarification system expansion joints and in the concrete basin next to the lime slacker to prevent concrete erosion. The flexible undersurface, allows for chemical rust inhibitors to remain in close contact with irregular surfaces and naturally expanding and contacting metal surfaces. Many coating companies have used a food pure grease like Crisco on their chains, pulleys, and other metal surface in and around these setting tanks. These product didn't work very well, now they use a NO-OX-ID barrier coating.
Prevent Biological Attack - NO-OX-ID Rust Preventative marine coating stop biological attack of algae, zebra mussels and other sea urchins to metal, plastic and concrete structures in water. NO-OX-ID'S non-drying flexible attributes discourage stable anchoring necessary for biological attachment:
STOP RUST BEFORE IT STARTS WITH A SAFEGARD PROTECTIVE COATING
Sanchem Inc. · Chicago, IL · 312-733-6100 · 800-621-1603
