Sanchem Inc. 1600 S Canal St. Chicago, IL 60616 312.733.7432
P-800.621.1603
About UsSafeGard CCNO-OX-IDNO-OX-ID  A Special WWSafeGardContact Us


SafeGard Rust Preventive Coating & Rust Inhibitors

Stop rust before it starts with SafeGard H water based rust preventive dip coating.  In just one coat, corrosion control is achieved by using water based rust proofing that contains a balanced rust inhibitor system. This rust prevention product is a cream colored liquid when applied but upon drying turns to a translucent light brown dry to the touch wax coating. Dyes can be added if color coding is desired.

SafeGard H

This corrosion resistant coatings will not transfer, abrade or run under normal handling. Therefore neither the floor of your packaging area, storage bins or the packages you send to your customers will be oil stained and messy. SafeGard H’s active rust inhibitor system neutralizes metal corrosion normally attributed to fingerprints from parts handling. This protective coating and its rust inhibitor system are compatible with lube oil so they do not need to be removed from internal parts before assembly.

At the standard application rate you will get 650-700 square feet per gallon at a thickness of 1.5-2.0 mils. This high performance corrosion resistant coating will give your parts over 2000 hours humidity and over 336 hours salt spray cabinet performance. SafeGard H meets the performance requirements of specification MIL-C-16173D Grade II.

SafeGard H is OSHA & EPA friendly because it contains no toxic or harmful materials. This rust preventive coating should be allowed to cure for 1 day before being put into service. To remove the protective coating, use a simple alkaline cleaner such as SafeGard 11085A. This anti corrosion coating can easily be applied by spray, brush, dip coating or roller. Spray equipment should be rinsed out with water at the end of the day. SafeGard H is rust proofing for long-term indoor or medium term outdoor storage.

rust preventive, rust preventive coating, corrosion protection, rust inhibitor, wax coating,    rust preventive, rust preventive coating, corrosion protection, rust inhibitor, wax coating, water based,   rust preventive, rust preventive coating, corrosion protection, rust inhibitor, wax coating, water based,

SafeGard CS

SafeGard CS is water based rust preventive acrylic coating designed to prevent rust to metal parts due to high humidity. This water based corrosion prevention product contains consists of non-toxic organic inhibitors formulated with water-based acrylic polymer, has no VOC’s and dries to a thin clear hard tack-free film that is extremely durable. SafeGard CS can be easily applied by dip coating, spray or brush. Clear barrier coating prevent rust all types of steel and aluminum for up to 5 years. Drying time is normally 10 to 15 minutes at room temperature. This anti rust product may be color coded for identification purposes.

SAFEGARD S

 

SAFEGARD S is a water dispersed corrosion preventive compound that leaves a firm coating on the surface of the metal that can be painted with most paints except epoxies or stenciled over.  This product is excellent for humid environments.

 

Image


      Image

                            SafeGard S - painted with and acrylic latex paint

 

SafeGard M-1

Outdoor corrosion protection on your metal parts will be achieved with SafeGard M-1. This rust proofing product is a translucent, self healing, scratch resistant, hard wax coating that is a clean and safe alternative to dirty, toxic and flammable solvent based rust prevention product. SafeGard M-1 is the ideal rust proofing product to protect bare metal, finished metal parts, including tooling, fixturing, dies, toolholders, milling cutters, sprockets, virtually any metal part subject to rust and corrosion.

This extremely effective rust inhibitor system provides two to three times the protection compared to the average rust preventative coating and is excellent as a sealant over black oxide and phosphate coatings because it seals out corrosion and enhances the color of the finish. Performance of over 2000 hours humidity cabinet and over 336 hours salt spray. It can also be used on bare metal surfaces for long term storage or overseas shipment. SafeGard M-1 meets the performance requirements of military specification Mil-C-16173 grade-1.  Once applied, it will not drain off parts or wick off into packaging materials.

SafeGard M-1 rust preventive coating can be applied to wet or dry parts by dip coating, brushing or low-pressure spraying. The thin-bodied liquid rapidly penetrates recessed areas and displaces moisture from metal surfaces. Supplied as a cream colored liquid, it dries in 10-30 minutes leaving a dry-to-the-touch, hard wax film of 1.5-2.0 mils thickness which actually improves the finish color. Product coverage is 650 square feet per gallon.  SafeGard M-1 costs just pennies per part to apply.  Dyes can be added if color coding is desired.

SafeGard Peelcoat

Preventing corrosion with an anti rust barrier coating that easily peels off without the need for alkaline cleaners, harsh solvent removers or paint strippers called SafeGard Peelcoat. To stop rust all you have to do is prevent moisture and oxygen from reaching the metal surface. The rust inhibitor system used in this water based coating will give you excellent corrosion resistance from moisture, salt spray and other corrosive environments.

SafeGard Peelcoat dries to a flexible firm coating that will not abrade under normal handling and packaging conditions. If used for as your final shipping coating the boxes will not get that undesirable oil stained look that is often seen from oil based anti rust prevention product. This rust preventive coating will not re-emulsify once drying period has taken place. The coating should be used only when you desire a rust preventive peelable coating for indoor storage or shipping. Peelcoat contains no solvents or VOC’s, it is non-toxic, non-flammable, non-hazardous to the environment.

SafeGard Peelcoat is a ready to use and dries to the touch in 2 to 4 hours and forms a solid film within 24 hours providing physical and mechanical protection to the surface underneath. The film maintains its strength and flexibility in high or low temperatures and tolerates sudden temperature changes with getting brittle. Peelcoat will not leave any residue or otherwise contaminate the surface, so no cleaning is needed prior to processing. Apply with a sprayer, brush or roller. Peelcoat covers 250 sq. ft. per gallon leaving a 3 mil dry film. The standard product is clear but white and other colors are available upon request.

SafeGard Peelcoat rust prevention product may be applied by dip, airless sprayer, brush or roller. Dry time will depend upon thickness, humidity and drying temperature. Corrosion protection and removal is a snap with SafeGard Peelcoat

SAFEGARD W

Safe, effective and economical rust prevention is achieved with SafeGard W. Your shipping packages will be cleaner and more presentable because this water based corrosion preventive leaves a soft translucent non-running oil coating on the metal surface upon drying. SafeGard W’s emulsification system enables it to be effectively applied over oily surfaces with good results while its active rust inhibitor system neutralizes metal corrosion normally attributed to fingerprints from parts handling. This protective coating and its corrosion inhibitor system is compatible with lube oil so it does not need to be removed from internal parts before assembly.

This OSHA friendly corrosion resistant coating has a pleasant fruity odor and does not contain any toxic or harmful materials. SafeGard W metal coating dries in less than 15 minutes and leaves a translucent rust preventive coating that is 1-5- 2.0 mils thick when dry. This product has excellent corrosion performance of over 2000 hours humidity performance, over 336 hours salt spray. Even though it does not wash off with water after drying, a simple water soluble alkaline cleaner such as SafeGard 11085A will easily and completely remove it. SafeGard contains no solvent and does not need a solvent to remove it. Coverage is 650-700 feet per gallon.

In the picture below, SafeGard W rust proofing is being applied to a tractor as a paint topcoat to stop rust that often occurs on overseas shipment. The second picture shows what the protective coating looks like after application and curing.

Rust proof corrosion inhibitor rust preventive rust preventative water based coating Rust proof corrosion inhibitor rust preventive rust preventative water based coating Anti corrosion coating dip coating prevent rust

Uses- SafeGard provides excellent protection on automotive body and parts, earth moving, transportation, mining, aircraft, farm and industrial machinery parts either in process, storage, or export shipment. Additional applications include:

  • Digs
  • Jigs
  • Tools
  • Fixtures
  • Bar Stock
  • Brake Drums
  • Brake Chains
  • Metal Stampings
  • Galvanized Pipe
  • Pickled Forgings
  • Sheet Metal Work
  • Automobile Stamping
  • Wheel Hub Assemblies
  • Iron and Steel Forgings
  • Semi-assembled Engines
  • Axles, transmission parts
  • Bearings and Race surfaces
  • Ferrous and non-ferrous metals
  • Overseas shipment and storage
  • Pumps and pumping equipment
  • Assembled units for rust proofing
  • Motor vehicle parts and accessories:
    Rings, Valves, Camshafts, Pistons
  • Protects painted surfaces

STOP RUST BEFORE IT STARTS WITH A SAFEGARD RUST PROOFING
Sanchem Inc. · Chicago, IL · 312-733-6100 · 800-621-1603

rust preventive, rust preventive coating, corrosion protection, rust inhibitor, wax coating,
rust preventive, rust preventive coating, corrosion protection, rust inhibitor, wax coating, water based,