Metal Corrosion Inhibitor & Sealant
Highly corrosive environments such as chemical manufacturing plants require extreme outdoor corrosion prevention such as SafeGard M1 and SafeGard Max. These metal corrosion inhibitor sealants contain the most active and safe metal corrosion inhibitor system available, with over a 50 year history of performance.
These products are to be used whenever you need a heavy duty rust preventive system with a firm or
hard coating. These products are often applied as a corrosion inhibitor sealant to protect painted parts, machines and surfaces from attack in severe environments.
This product can be colored for part identification and thickened for brush applications. These heavy duty products contain no VOC’s and will give you the maximum corrosion resistant barrier coating that you can achieve using a water based coating.
SAFEGARD M-1: Rust Corrosion Inhibitor
Outdoor corrosion prevention on your metal parts will be achieved with SafeGard M-1. This rust proofing product is a translucent, self healing, scratch resistant, hard wax coating that is a clean and safe alternative to dirty, toxic and flammable solvent based rust preventatives. SafeGard M-1 is the ideal anti rust and barrier coating for bare metal or finished metal parts including tooling, fixtures, dies, tool holders, milling cutters, sprockets -- virtually any metal part subject to corrosion.
This extremely effective corrosion inhibitor system provides two to three times the protection compared to the average rust preventative and is excellent as a sealant over black oxide coatings and phosphates because it seals out corrosion and enhances the color of the finish. Corrosion performance of over 2000 hours humidity cabinet and over 336 hours salt spray. It can also be used on bare metal surfaces for long term storage or overseas shipment. SafeGard was the best product tested in a recent six-sigma rust prevention study run at Caterpillar Tractor. SafeGard M-1 meets the performance requirements of military specification Mil-C-16173 grade-1.
SafeGard M-1 rust preventative can be applied to wet or dry parts by dip coating, brushing or low pressure spraying. The thin bodied liquid rapidly penetrates recessed area and displaces moisture from metal surfaces. Supplied as a cream colored liquid, it dries in 10-30 minutes leaving a dry to the touch, hard wax film of 1.5-2.0 mils thickness which actually improves the finish color. Product coverage is 650 square feet per gallon.
Once applied it will not drain off parts or wick off into packaging materials. SafeGard M-1 is the ideal protection for all bare metal or finished metal parts including tooling, fixtures, dies, tool holders, milling cutters, sprockets - virtually any metal part subject to corrosion. SafeGard M-1 costs just pennies per part to apply.
How long has this water based coating been on the market? For over 50 years, SafeGard has been used for rust proofing metal surfaces. This corrosion resistant coating has been used by major automotive, tractor and truck manufacturers around the world.
SAFEGARD MAX: Rust Corrosion Inhibitor
Outdoor corrosion prevention on your metal parts will be achieved with SafeGard Max. This rust proofing product is a translucent, self healing, scratch resistant, hard wax coating that is a clean and safe alternative to dirty, toxic and flammable solvent based rust preventatives. SafeGard Max is the ideal anti rust and barrier coating for bare metal or finished metal parts.
|SafeGard||coating type||salt spray hrs||removable||use||use||coverage||film|
|Rust Preventatives||water based||ASTM B117||indoor||outdoor
|SafeGard Max||Hard wax||Over 360 hrs||No||yes||yes||600||1.5 to 2.0|
|SafeGard M1||Firm wax||Over 360 hrs||yes||yes||yes||600||1.5 to 2.0|
|SafeGard H||Medium wax||over 360 hrs||yes||yes||yes||650-700||1.75 to 2.5|
|SafeGard W||Oil type||Over 360 hrs||yes||yes||yes||650-700||1.75 to 2.5|
|SafeGard W-JD||Soft oil||100 hrs||yes||yes||no||650-700||1.75 to 2.5|